Description; General; Preface; Safety Instructions - Hexagon m&h IRP25.50 Instrucciones De Operación

IRP25.50
1

Description

1.1

General

1.1.1

Preface

It is imperative that the safety information contained in these operating instructions is strictly observed to guarantee
the safe and reliable operation of the touch probe and avoid personal injury and damage to property. The table below
explains the symbols used for the relevant safety information:
NOTICE
INFORMATION
1.1.2

Safety Instructions

Risk of material damage!
•
Guard the manual or automatic positioning of the touch probe to ensure that the machine comes to an
immediate feed stop if the stylus is inadvertently deflected from the sensing process!
Risk of material damage!
•
A feed or spindle stop, triggered by a switching signal or standby signal from a touch probe, can only occur if
a touch probe is actually inserted in the spindle. This safety logic prevents the spindle or feed being stopped
during normal milling operations if a signal from a measuring probe is triggered for one of the following
reasons:
•
Battery change and subsequent functional check of the probe by manually switching it on.
Risk of material damage from by third-party components!
•
Only use the original spare parts listed in these operating instructions to perform maintenance and repairs.
The information given in these operating instructions can be modified by the manufacturer without prior
notification. It is therefore the responsibility of the user to enquire regularly about updated operating instructions.
1.1.3

Declaration of Conformity

The EC Declaration of Conformity can be found at the end of these operating instructions.
If required, a copy of the signed original declaration of conformity may be requested from the address given on the
back cover.
NOTICE indicates important information that, if not observed, could lead to
property damage / malfunctions.
INFORMATION indicates important information or helpful advices for the work with
the described device.
NOTICE
NOTICE
NOTICE
INFORMATION
Description
47