2.11 Probe Extension - Hexagon m&h IRP25.50 Instrucciones De Operación

IRP25.50

2.11 Probe Extension

Risk of damage to the equipment!
•
Before dismounting the probe clean and dry the probe well!
•
Do NOT blow off with compressed air!
•
When assembling the extension and the probe, ensure the O-Rings are properly seated.
•
Align probe to the spindle centre.
•
Calibrate the probe.
Probe Extensions
Order Number
91.00-V50
91.00-V75
91.00-V100
Fig. 21 Probe extension
Length
50 mm (1.97")
75 mm (2.96")
100 mm (3.94")
NOTICE
Clamping screw
(0506)
M=10 Nm (7 lbf.ft) max
O-Ring 26x2 Viton
(0857)
Clamping screw
(0506)
M=10 Nm (7 lbf.ft) max.
O-Ring 26x2 Viton
(0857)
Operation
83