Modular System (Measuring Units Pp41.00 And My21.00) - Hexagon m&h IRP25.50 Instrucciones De Operación

Operation

2.12 Modular System (Measuring Units PP41.00 and MY21.00)

Risk of damage to the equipment!
•
Clean and dry the probe body well before removing the measuring unit.
•
Do NOT blow off with compressed air!
•
When screwing in the extension, make sure the O-Ring is properly seated.
•
The probe may be extended by a maximum of 400 mm.
•
Align probe in the spindle axis to the spindle centre.
•
Calibrate the probe.
Fig. 22 Modular system
84
Measuring Unit Extensions
Order Number Length
21.00-VE30 30 mm (1.18")
21.00-VE50
50 mm (1.97")
41.00-VE100
100 mm (3.94")
41.00-VE200
200 mm (7.87")
Measuring
unit
(41.00-PP or 21.00-MY)
Styli
refer to chapter 1.9.4
NOTICE
Up to 5 measuring units can be
fitted. All unused screw holes in the
cross adapter must be sealed using
screw plugs 41.00-KA-V.
C-Spanner
(2951)
O-Ring 24x2 Viton
(2074)
Cross adapter
(41.00-KA)
M=12 Nm (8.8 lbf. ft.)
IRP25.50