On Consignment Of The Machine; Technical Description - TSM GRANDE BRIO RIDE ON 75 550 Instrucciones Originales

GRANDE BRIO RIDE ON 75
OPERATING MANUAL
1 FOREWORD
This is a floor scrubbing machine that is able to clean a wide variety of types of flooring and types of dirt by using the mechanical
action of the rotation of the brush and the chemical action of a water-detergent solution. As it moves forward it also gathers up the
dirt removed from the floor and the detergent solution that has not been absorbed by the floor.
The machine should only be used for cleaning hard floors. The machine can work properly, only if used correctly and maintained in
full efficiency. We therefore ask you to read this user manual carefully and not to operate unless all the information reported is well
understood.
Any improper use of the machine is forbidden. Any kind of claim against the producer or his representative for damages due to an
use not conformed to machine destination is excluded.
Put the manual at operator's disposal so that he can consult it for all eventualities.
In case of doubts and / or needs, we remind you to always request the intervention of the service organization of TSM SRL, in
collaboration with our agents.

2 ON CONSIGNMENT OF THE MACHINE

Immediately check, when receiving the machine, that all the materials indicated on delivery documents have been received and
also that the machine has not been damaged in transit. If it has been damaged, this damage must be immediately reported to the
shipper and also to our customer service department. Only acting promptly in this manner will make it possible to receive missing
material and to be reimbursed for damage.

3 TECHNICAL DESCRIPTION

GRANDE BRIO RIDE ON 75
Scrubbing path
Tanks capacity
Coverage performance
Working time
Life time UV source
Ecoray system power
Brush size
Rpm brush
Brush pressure
Brushes motor power
Squeegee width
Water lift
Vacuum motor (stages)
Traction motor power
Voltage
Total power
Battery charger
Max battery capacity (Agm)
Maximum gradient
Maximum speed
Steering range
Noise level
Machine dimensions (L x l x h)
- ENGLISH -
550
mm 550
l 75/80
m²/h 3000
h > 3
h -
microW/
-
mm²
mm 2 X 280
rpm 190
kg 20
W 2 x 200
mm 2 x 200
mm H O 1590
2
W 490 (3)
W 450
V 24
W 1340
A/h 15
Ah/5 150
% 5
Km/h 5
mm 1500
dB(A) < 66
mm 1150x780x1430
650 650 Ecoray
650 650
75/80 75/80
3250 3250
> 3 > 3
- 9000*
- 100
4 X 180 4 X 180
190 190
28 28
4 x 100 4 x 100
4 x 100 4 x 100
1590 1590
490 (3) 490 (3)
700 (frontal) 700 (frontal)
24 24
1340 1340
15 15
150 150
5 5
5 5
1150 1150
< 66 < 66
1150x780x1430 1150x780x1430
21
800 C62
800 350
75/80 75/80
4000 3200
> 3 > 3
- -
- -
4 X 205 cil. 2x100 x 610
210 210
35 0-30
4 x 200 2 x 500
4 x 200 2 x 500
1590 1590
490 (3) 490 (3)
700 (frontal) 450
24 24
1990 2040 (2140)
15 15
150 150
5 5
5 5
1150 1500
73 73
1150x780x1430 1150x780x1430