Menu Status (System); Water Level - Grundfos IO Instrucciones De Instalación Y Funcionamiento

6.2 Menu STATUS (SYSTEM)

The displays appearing in this menu are status
displays only. It is not possible to change or set
values.
The status values in these displays are stated as a
guide.
The counters for the system and each pump (1 to 4)
can be reset in the INSTALLATION menu, display
"Counter resetting". See section 6.4.7 Counter
resetting.

6.2.1 Water level

Field "Water level":
The value is the actual average of the water levels
for all pumps in the pit.
Field "Max. water level":
Maximum measured water level for one of the pumps
since last counter reset.
6.2.2 Energy
Field "Energy":
Total energy consumption for the system since last
counter reset. The energy consumption is an
accumulated value.
Field "Operating time":
Total number of operating hours since last counter
reset.
22
6.2.3 Relative operation
Field "Activity":
Percentage of pump operating time (one or more
pumps) (1 + 2 + 3 + 4, fig. 16) during the last
30 days.
1 + 2 + 3 + 4 = Pump active
P1 2
P2 1
Time line, 30 days
Activity
Fig. 16
Field "Parallel":
Operating time of two or more pumps running in
parallel (1 + 2, fig. 17) during the last 30 days shown
in percentage of total operating time.
Total operating time
P1
P2
1
Parallel operation
Fig. 17
3 4
30 days
2