Grundfos IO Instrucciones De Instalación Y Funcionamiento página 25

6.4.6 System self-configuration
This display is used to enable the self-configuration
function.
See section 4. Installation.
Select the desired function/action:
• Reset addresses
(resets all pump addresses)
• Accept addresses
(accepts all pump addresses)
• Copy parameters
(copies the parameters of pump 1 to the other
pumps in the system).
6.4.7 Counter resetting
This display is used to reset system and pump
counters.
Select the counters to be reset:
• All alarm logs (P1...P4)
• All pumps
• Pump 1
• Pump 2
• Pump 3
• Pump 4
• System.
When one of the above options has been chosen,
a warning will appear in the display.
25