Sliding Base/Fence Extension - Skil 3820 Instrucciones De Funcionamiento

SM 2610005400 10-09:SM 2610005400 10-09.qxp 12/2/09 7:55 AM Page 54
Basic Saw Operations

Sliding Base/Fence Extension

W RNING
compound cuts to provide sufficient (minimum 6") spacing
from hand to saw blade.
Sliding Base:
1. Loosen the thumbscrew 1 in sliding base channel
(Figure 23).
2. Slide sliding base/fence 2 to the desired position.
3. Tighten thumbscrew 2.
Sliding Fence:
1. Unlock the fence locking lever 3 (Figure 24).
2. Slide fence to proper position 4.
3. Relock fence in place.
4. Move the head assembly to check clearance with fence.
C UTION
in position.
Stop Block:
Stop block can be used to make repetitive length cuts.
1. Attach stop block 5 to extension rail 6 (Figure 25).
2. Loosen thumbscrew 7 on backside of stop block 5.
3. Slide stop block to desired length of cut.
4. Tighten thumbscrew.
Note: Stop block can be stored by loosening knob and
flipping stop block.
Extend and use sliding base/fence when
making severe bevel, severe miter or
During transportation, sliding base and
fence should always be secured in the full
1
FIG. 24
54
FIG. 23
2
4
3
FIG. 25
5
7
6