Troubleshooting - Skil 3820 Instrucciones De Funcionamiento

SM 2610005400 10-09:SM 2610005400 10-09.qxp 12/2/09 7:55 AM Page 74

Troubleshooting

W RNING
troubleshooting.
TROUBLE: S W WILL NOT ST RT
PROBLEM 1. Power cord is not plugged in.
2. Fuse or circuit breaker tripped.
3. Cord damaged.
4. Burned out switch.
REMEDY 1. Plug saw in.
2. Replace fuse or reset tripped circuit breaker.
3. Have cord replaced by an uthorized Skil Service
Center or Service Station.
4. Have switch replaced by an uthorized Skil
Service Center or Service Station.
TROUBLE: BL DE DOES NOT COME UP TO SPEED
PROBLEM 1. Extension cord too light or too long.
2. Low house voltage.
REMEDY 1. Replace with adequate cord.
2. Contact your electric company.
TROUBLE: EXCESSIVE VIBR TION
PROBLEM 1. Blade out of balance.
2. Saw not mounted securely to stand or workbench.
3. rbor Nut not tight.
REMEDY 1. Discard Blade and use different blade.
2. Tighten all mounting hardware.
3. See " djustments" section, "Removing and
Installing the Blade".
Turn the switch OFF and always remove
plug from the power source before
7