SMA Solar Technology AG
6
Removing the AC-CON
1. Disconnect the inverter from all voltage sources (see Section 5, page 13).
2. Open the AC terminals and remove the insulated
conductors L1, L2, L3, and N from the openings.
3. Only with STP 15000TLEE / STP 20000TLEE: If the
new AC-CON is delivered without ferrite bead,
remove the ferrite bead from the old AC-CON and
keep it for later use. For this purpose, remove the 2
cable ties from the ferrite bead.
4. Remove all connections on the AC-CON.
Replacement Manual
STP8-17-STP15-20TLEE-AC-CON-RM-xx-10
6 Removing the AC-CON
23