After Use - Rowenta IS6300 Manual De Instrucciones

Ocultar thumbs Ver también para IS6300:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
ACCESSORIES
Before using an accessory, check the manufacturer recommendations.
It is also recommend that you carry out a test on part of the fabric which cannot be seen.
The fabric brush opens the weave of the fabrics for better steam penetration.
Be sure unit is unplugged and completely cool before attaching accesories.
up the bottom of the brush with the bottom of the
steam head. Gently push the top of the brush onto
the steam head until it clicks into place.
or nap of the fabric.
and completely cool. Remove it by pressing on the
release tab on top of brush while pulling it forward.
The lint pad is a separate accessory and cannot be attached to the steam head.You can
use the lint pad independently from the steamer.
The lint pad removes hair, lint and animal fur for a professional looking finish.
pad on an old cloth that can be discarded.
The steam cap cannot be used together with the fabric brush on the steam head.
Be sure the unit is unplugged and completely cool before attaching accessories.

AFTER USE

The power indicator light will go off, and you can then unplug the appliance.
The steam cap provides even distribution of steam,
filters impurities from the water and protects fabrics
from water dripping.
The steam head should be totally covered.
to be steamed.
unplugged and completely cool.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido