Installing And Replacing Gas Containers - Campingaz Oxypower CV60 Manual De Instrucciones

INSTALLING AND REPLACING GAS CONTAINERS

1 - INSTALLING GAS CONTAINERS
IMPORTANT: When installing or changing a gas cylinder or oxygen tank,
always operate in a well-ventilated location, preferably outside, never near a
flame, heat source or spark (cigarette, electric apparatus, cooker, etc.) and far
away from other people and inflammable materials.
As the CAMPINGAZ® CV 470 PLUS cartridge is fitted with a valve, it may
be removed from this equipment and reinstalled on other CAMPINGAZ®
equipment in the 470 range designed to operate exclusively with this car-
tridge.
A) Check that all the gas and oxygen valves are tightly closed on:
- the welding torch
- the gas valve and oxygen regulator at the end of the hoses.
B) Installing the regulator on the oxygen bottle
Screw the regulator anti-clockwise onto the oxygen bottle as far as it will go.
Manual tightening is enough to stop it leaking. If there is a leak during this opera-
tion, continue screwing rapidly as far as possible.
C) Installing the gas valve on the CV 470 PLUS cartridge.
If an empty cartridge is already in place, first consult the section on
"Replacing gas containers" (p. 42, paragraph 2-b)).
OXYPOWER® CV60 is specially designed and manufactured to operate
exclusively with CAMPINGAZ® CV 470 PLUS or CV 470 cartridges. It can
be dangerous to try and adapt another cartridge not specially designed for
the purpose onto equipment using a CAMPINGAZ® cartridge.
Having read the paragraph "Important" above:
1) Unscrew the holding clamp until its end stop without forcing (Fig. B)
(direction OFF).
40
®
OXYPOWER CV60