1. Unsnap and remove the trim from
around the radio and climate
control. (Figure A)
2. Unsnap the driver's side panel
from the outside edge of the dash.
(Figure B)
3. Remove (2) screws from the knee
panel and pull the top of the panel
back so it doesn't overlap the
instrument cluster. (Figure C)
4. Remove (2) screws from the driver's
side vent trim and remove. (Figure D)
(Figure A)
Dash Disassembly
(Figure B)
(Figure C)
99-7345B
5. Remove (5) Phillips screws from
the instrument cluster panel, and
then pull the panel out towards
the steering wheel. Unplug all
harnesses, making sure not to
damage any wires or connectors in
the process. (Figure E)
6. Remove (4) Phillips screws securing
the climate controls, and set aside
for kit assembly. (Figure F)
Continued on the next page
(Figure D)
2
(Figure E)
(Figure F)