Dash Disassembly; Kit Preparation - Metra 99-7345B Manual Del Usuario

Dash Disassembly

7. Remove (6) Phillips screws
securing the radio trim panel and
then remove. (Figure G)
8. Remove (4) Phillips screws, (2
above and 2 below) from the radio
assembly, then unplug and remove
the radio. (Figure H)
Continue to kit preparation
(Figure G)
(Figure H)
99-7345B
1. Remove (3) Phillips screws
securing the vent on the factory
radio trim panel and then remove.
(Figure A)
2. Install the factory vent to the radio
trim panel using (3) #8 x 3/8"
Phillips pan head screws supplied.
(Figure B)
Continue to kit assembly
3

Kit Preparation

(Figure A)
(Figure B)