Category
Audio
HDMI Audio
Out
• This setting
is available
only when
the TV is
connected
by an HDMI
cable.
DRC
EN
Menus / Options
HDMI
Channel Level
Multi(LPCM)
• Tests or sets
• The
the volume
multi-
for each
channel
speaker.
audio signals
are output
from HDMI
OUT jack
with LPCM.
Delay Time
• This is a
parameter
for
optimizing
the timing at
which the
sound
outputs from
the speakers
according to
the distance
from the
listening
position.
Audio Mute
Auto
On
Off
Test Tone
Off
Select "Off" to
• "Test
deactivate "Test Tone".
Manual
Tone" is
Select "Manual", then
Auto
the test
press [OK] to manually
tone
set the volume for the
which
desired speaker.
can be
Select "Auto", then
output
press [OK] to
from the
automatically output
speakers
the test tone from each
so you
speaker.
can
adjust
the
volume
for each
speaker.
Front Lch
If you have selected
"Manual" in "Test Tone",
Center
select the desired
Subwoofer
speaker to set and
Front Rch
adjust the volume for
Surround
0dB to
the selected speaker.
Rch
-12dB
If you select "Auto" in
(Default
Surround
"Test Tone", test tone
: 0dB)
Back Rch
will automatically be
Surround
output in order. Adjust
Back Lch
the volume of the
Surround
speaker that outputs
Lch
the test tone.
Default
Select "Default", then
press [OK] to reset
"Channel Level" setting
to the default.
Distance
Feet
Select the distance
from the listening
Meters
position
Front
0ft to
to the speaker to get
60ft
the ideal delay time.
(Default
Center
: 12ft)
Surround
0ft to
60ft
(Default
Surround
: 10ft)
Back
Default
Select "Default", then
press [OK] to reset
"Delay Time" setting to
the default.
Mutes the HDMI audio
signal.
Sets whether to
compress the range of
sound volume
(dynamic range
control) when Dolby
Digital, Dolby Digital
Plus or Dolby TrueHD
audio is played back.
(continue on next page)
Description
45