FUNAI PB750FX1 El Manual Del Propietario página 59

"100BASE Full":
Set the connection speed to "100BASE
Full".
3
Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
Note
• Choose a connection speed in
accordance with your network
environment.
• The network connection may be
disabled depending on the device,
when the settings are changed.
BD-Live Setting
You can limit Internet access for BD-Live
discs. (The default setting is "Allow".)
1
Press [OK] to show the options for
"BD-Live Setting".
2
Use [K / L] to select the desired
setting, then press [OK].
"Allow":
Internet access is permitted for all BD-Live
contents.
"Limited Allow":
Internet access is permitted only for
BD-Live contents which have content
owner certificates. Internet access without
the certificates is prohibited.
"Prohibit":
Internet access is prohibited for all BD-Live
contents.
3
Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
MAC Address
You can check the MAC address of this unit.
"MAC Address" is for viewing only.
Wireless
If you connect this unit to the network
wirelessly, select "Wireless" and set up
necessary settings.
Wireless Router
In order to use a wireless network, you must
set up the connection to the wireless router.
54
Find wireless network
Search for wireless networks automatically
and select the wireless network name (SSID)
from the list.
1
In "Network Connection" menu, use
[K / L] to select "Network
Selection", then press [OK].
2
Use [K / L] to select "Wireless", then
press [OK].
3
Use [K / L] to select "Wireless
Router", then press [OK].
4
Use [K / L] to select "Find wireless
network", then press [OK].
• This unit will start searching for wireless
networks automatically.
5
The list of wireless networks will be
displayed. Use [K / L] to select the
appropriate wireless network name
(SSID), then press [OK].
• This unit will start searching for the
authentication setting of the selected
wireless network automatically.
If the unit finds the authentication setting of
the selected wireless network, skip to step 7.
If the unit fails to find the authentication
setting automatically, proceed to step 6 to
select it manually.
6
Use [K / L] to select the
authentication setting of the
selected wireless network, then
press [OK].
• For a wireless network with
authentication setting, select the
authentication setting, according to the
security type of the wireless network.
• For a wireless network without
authentication setting, select "None".
"None":
Set the authentication setting to "None".
"WEP":
Set the authentication setting to "WEP".
"WPA-PSK (TKIP)":
Set the authentication setting to "WPA-
PSK (TKIP)".
"WPA-PSK (AES)":
Set the authentication setting to "WPA-
PSK (AES)".
"WPA2-PSK (TKIP)":
Set the authentication setting to "WPA2-
PS K(TKIP)".
EN