Software Update - FUNAI PB750FX1 El Manual Del Propietario

3
Use [K / L] to select "Custom", then
press [OK].
• For details of each setting, refer to
following pages.
"IP Address Setting" / "DNS Setting":
Refer to "IP Address Setting / DNS Setting"
on page 52.
"Proxy Setting":
Refer to "Proxy Setting" on page 53.
"BD-Live Setting":
Refer to "BD-Live Setting" on page 54.
"MAC Address":
Refer to "MAC Address" on page 54.
Note
• You cannot select "Advanced Settings" if
"Wireless Router" setting is not
completed.
Disable
Deactivate all the network connection and
settings.
1
In "Network Connection" menu, use
[K / L] to select "Network
Selection", then press [OK].
2
Use [K / L] to select "Disable", then
press [OK].
3
Use [K / L] to select "Yes", then
press [OK].
4
Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
Note
• The network connection can be
reactivated by setting network
connection to "Wired" or "Wireless".

Software Update

[SETUP] A "Custom" A "Others" A "Software Update"
To select the "Software Update", you must
connect the AC adapter.
Current Version
You can confirm the current software version.
56
1
In stop mode, press [SETUP].
2
Use [K / L] to select
[OK].
3
Use [K / L] to select
[OK].
4
Use [K / L] to select "Software
Update", then press [OK].
5
Use [K / L] to select "Current
Version", then press [OK].
6
Press [OK] or [RETURN] to exit.
Note
• Please visit www.funaiamerica.com to
download the latest software version.
Disc Update
You can update the software by using a disc.
1
Prepare a software update disc:
Please access
www.funaiamerica.com, and
download the latest software to a
blank disc by following the
direction described on the site.
• Use a blank disc and download one
software per a disc.
• For more details on how to download
the software, please refer to the site.
2
Follow steps 1 to 4 in "Current
Version" above on this page.
3
Use [K / L] to select "Disc Update",
then press [OK].
• Confirmation message will appear.
4
Use [K / L] to select "Yes", then
press [OK].
• Press [A OPEN] on the unit to open the
disc lid.
• Insert the software update disc created
at step 1 and then close the disc lid.
5
After completing loading disc,
confirmation message will appear.
Select "Yes" and press [OK] to start
updating.
• It may take a while to complete the
updating.
6
After the disc update finishes, this
unit will restart.
, then press
, then press
EN