Attaching The Brush; Removing The Brush - Steinbach Poolrunner S63 Manual Original

20°/20°
(for round pools)

Attaching the brush

Only attach the brush if it can assist cleaning (e.g. for removing a biofilm). In the case of
an incline, unevenness or too much dirt on the floor, the brush may have an adverse
effect on the cleaning result.
1. Press the brush strip
on the bottom of the lower unit
2. Make sure that the brush strip
completely engaged and fits tightly.
The brush is installed.

Removing the brush

1. Unlatch the hook of the brush strip
from the inside and press the brush
strip out of the bottom part
same time.
2. Take out the brush strip
The brush is taken out.
into the recess
6
.
4
has
6
6
at the
4
.
6
3
4
6
4
5
6
4
35