Saivod SAP1220 Serie Manual Del Usuario página 126

Installation in a double-hung sash window(Optional)
1. Connect the rain guards to the insect guard net.
Insert all three projections on each rain guard into the holes in the insect guard net.
Side "A" will now be at the top, as indicated in the diagram.
2. Attach the guard combined above to the window panel.
Push the insect guard net firmly to ensure that its four projections fit into the holes
in the window panel.
Side "A" will now be at the top, as indicated in the diagram.
3. Cut the sponge A (adhesive type) to the proper length and attach it to the
window stool and to the bottom of sash.
4. Attach the window panel to the window stool.
Make sure that the exhaust cover is attached to the window panel.
Inner width of the window:20.5"(520mm)
Use the window panel.
Insect guard net
Projec-
tion
Projection
"A"
Hole
Rain guard
"A"
Window panel
Sponge A