Description; This Is What The Equipment Set Tp 1410 Can Do; Additional Material/Prerequisites For Operation - Festo TP1410 Instrucciones De Utilizacion

8 Description

8.1 This is what the equipment set TP 1410 can do

The equipment set TP 1410 servo brake and actuator system, abbreviated motor test bench, is a complete
load and actuator system. It allows the systems under examination to be analyzed in different load
situations.
The concept makes a clear distinction between the test specimen and the load. A practical quick-changing
system allows the test specimens (motors) to be set up and changed quickly. The test specimens are
connected using the flexible A4 EduTrainer
Simple tests can be performed also without a PC and software, such as recording a characteristic curve. The
integrated display shows measured values, characteristics and the function mode.
Adapted to the servo brake and actuator system of Festo Didactic, the convenient software DriveLab
provides a wide range of options.
With the electric teaching machines, virtually all electric circuits and actuators used for industrial,
commercial and domestic purposes can be explained in a practice-oriented manner based on the level of
training.
These include:
•
Single-phase and three-phase actuators
•
DC actuators
• Modern servo drives.

8.2 Additional material/prerequisites for operation

•
A laboratory table or a table of similar stability.
•
A grounded power connection (230 V AC 1~) protected against short circuits and overloads.
•
A protective grounding conductor for the connection of the additional grounding conductor cable.
•
A test specimen.
•
Several connecting cables with 4 mm safety plugs.
• Optional: PC with Windows operating system and software DriveLab.
© Festo Didactic 8121048
.
®
Servo brake and drive system
63