SWM VA'RE:Z125 Guía Rápida página 48

Clock Settings
Press the "Set" key (1) until "CLOCK" appears.
-
Press the "Set" key (1) and hold it for more than 3
-
seconds until the hours flash on the display.
Press the "Set" key (1) and set the hour; to confirm
-
settings, press the "Set" key (1) and hold for more
than 3 seconds until the tenths of minutes flash on
the display.
Press the "Set" key (1) and set the tenths of minutes;
-
to confirm settings, press the "Set" key (1) and hold
for more than 3 seconds until the minutes flash on
the display.
Press the "Set" key (1) and set the minutes; to confirm
-
settings and exit settings, press the "Set" key (1) and
hold it for more than 3 seconds.
TRIP Setting
Press the "Set" key (1) until "TRIP" appears and then
-
press the button (1) for more than 3 seconds to reset
the value and restart the count from 0 km or miles.
Setting the Unit of Measurement
The unit of measurement must be set with the
-
motorcycle stopped and key in the ON position. Press
the "Set" key (1) until "ODO" appears and then press
the button (1) for more than 3 seconds to switch from
km to miles or vice versa.
Error Messages
In the event of a fault, the relevant error code is
-
displayed on the display (1); contact the closest SWM
dealer to check the fault.
Operate as shown for the following error codes.
15
EN -