Bircher Reglomat Herkules 2E Traducción Del Manual De Instrucción Original página 5

5.2 Programming Sensor Functions by Remote Control
Sensor Function
Mounting Height
Output #1
Configuration
In
?
Green LED
Yellow & green
wires
Output #2
Configuration
In
?
Red LED
Pink & grey wires
To activate
this output,
press
F

followed by  .. 
Output #1
Field size/
sensitivity
Output #2
Field size/
sensitivity
5
RegloBeam 2 Description
Function Factory Settings in bold with *
Hight
2.0 – 2.5 m
2.5 – 3.0 m
'
3.0 – 4.0 m
A
4.0 – 5.0 m
5.0 – 6.0 m
'
5.0 – 7.0 m
 *



Out
B








 *
Out
C





X-Small field/least sensitive

Small field/less sensitive

D
Medium field/normal sensitivity

 * Large field/very sensitive
X-Large field/most sensitive

X-Small field/least sensitive

Small field/less sensitive

E
Medium field/normal sensitivity

Large field/very sensitive
 *
X-Large field/most sensitive

Value
i


i

i
 *
After mounting height is set, most typical

applications require no further program-
ming.

Vehicles forward
Vehicles backward
Vehicles both directions
People forward
People backward
People both directions
People & vehicles forward
People & vehicles backward
People & vehicles both directions
Vehicles forward
Vehicles backward
Vehicles both directions
People forward
People backward
People both directions
People & vehicles forward
People & vehicles backward
People & vehicles both directions
Ensure proper mounting height
is programmed for optimum
sensor performance
For people/vehicle separation
use mounting height 3 m and up
For wide field use mounting height
under 4 m
* Factory settings