Hach AS950 Manual Del Usuario página 14

5.1.5.1 Select the type of program
Select the type of sampling program to configure.
1. Push MENU.
2. Go to Programming>Sample Programming.
3. Select the first row.
4. Select an option.
Note: For descriptions of all the options, refer to the expanded user manual on the manufacturer's website.
Option
Custom Single One sampling program.
Custom Dual
5.1.5.2 Enter the bottle and tubing information
Enter the number of bottles in the sampler, the bottle size and the intake tubing size.
1. Push MENU.
2. Go to Programming>Sample Programming.
3. Select an option.
Option Description
Total Selects the number of bottles in the sampler.
Bottles
Bottles per Selects the number of bottles used by each sampling program. The bottles in the
3
Program sampler are divided between the two sampling programs.
Bottle Enters the volume capacity of each bottle. To change the units, select the units
Volume and push the UP or DOWN arrow key.
Tubing Enters the length and diameter of the intake tubing. Length—Enters the length
of the intake tubing from the strainer to the liquid detector. Diameter—Selects
the diameter of the intake tubing 6.33 mm (¼ in.) or 9.5 mm (
Note: An accurate length is necessary to get an accurate sample volume.
5.1.5.3 Select the sample pacing
Select when a sample is collected. For example, set the sampling program to collect a sample at a
15-minute interval or a 100-liter flow interval.
1. Push MENU.
2. Go to Programming>Sample Programming>Pacing.
3
Available only when Custom Dual or Stormwater is selected. Refer to
program on page 14.
14 English
Description
Dual sampling program. The bottles in the sampler are divided between two
sampling programs. The two sampling programs can operate in parallel, in
series or independently (default).
3
/ in.).
8
Select the type of