Welch Allyn CP Serie Manual Del Usuario página 27

Directions for Use
Figure 39. "Auto ECG Post-Print" Screen
Doe, Jane
Auto ECG Post-Print
I
V
aVR
Print
Copy
8. Press the desired softkey.
Softkey
Print Copy
Edit Test
Manual Save
Manual Send
Repeat Test
Exit
9. Press Exit to complete patient testing.
9:17AM Oct 16 05
Edit Manual Repeat
Test Save Test
Effect
Prints a copy of the test.
Note
To learn how to print multiple copies of all tests automatically, see
Interpretation and Copy Settings for Auto Reports"
Brings up the Edit Test – Patient Data screen. From here you can edit or confirm the
patient data and interpretation statements. See
After Printing"
Saves the test to the electrocardiograph's test directory. See
In the Test Directory"
This Manual Save softkey appears only when Auto Save is disabled. For more on
Auto Save, see
(May appear in place of Manual Save in
options:
• Memory Card
An SD memory card or removable USB storage device must be in place.
• Workstation
Either wireless communications must be configured or a USB cable must connect
the CardioPerfect workstation to the electrocardiograph's Com port B (
This Manual Send softkey appears only when Auto Save is enabled. For more on
Auto Save, see
Lets you repeat a test for the current patient.
The ECG Preview screen appears if all leads are connected to the patient.
WARNING Failure to follow these instructions could incorrectly associate an
ECG test with the wrong patient.
HR 120
Softkeys for choosing
post-printing options
Exit
Print Copy is not available for Stat Auto ECG, or if
there is no Patient Name or ID entered for Auto
on page 61.
on page 70.
"Reviewing the Miscellaneous ECG Settings"
Figure 4
"Reviewing the Miscellaneous ECG Settings"
Chapter 5 Performing ECG Tests
"Reviewing the
on page 43.
"To Edit or Confirm a Test Directly
"Managing Saved Tests
on page 48.
on page 14.) Displays two softkey
on page 48.
59
).