Cub Cadet LT1045 Manual Del Operador página 13

Systems Indicator Monitor / Hour Meter Systems Indicator Monitor / Hour Meter Systems Indicator Monitor / Hour Meter Systems Indicator Monitor / Hour Meter
LCD LCD LCD LCD
When the ignition key is rotated out of the STOP position but not When the ignition key is rotated out of the STOP position but not When the ignition key is rotated out of the STOP position but not When the ignition key is rotated out of the STOP position but not
into the START position, the systems indicator monitor displays into the START position, the systems indicator monitor displays into the START position, the systems indicator monitor displays into the START position, the systems indicator monitor displays
the battery's output, in volts, on its LCD for approximately five the battery's output, in volts, on its LCD for approximately five the battery's output, in volts, on its LCD for approximately five the battery's output, in volts, on its LCD for approximately five
seconds, after which it displays an hour glass and the hours seconds, after which it displays an hour glass and the hours seconds, after which it displays an hour glass and the hours seconds, after which it displays an hour glass and the hours
of tractor operation. Once the tractor is started, the monitor of tractor operation. Once the tractor is started, the monitor of tractor operation. Once the tractor is started, the monitor of tractor operation. Once the tractor is started, the monitor
continually displays an hour glass and the hours of tractor continually displays an hour glass and the hours of tractor continually displays an hour glass and the hours of tractor continually displays an hour glass and the hours of tractor
operation on its LCD. operation on its LCD. operation on its LCD. operation on its LCD.
NOTE: Hours of tractor operation are recorded any time the NOTE: Hours of tractor operation are recorded any time the NOTE: Hours of tractor operation are recorded any time the NOTE: Hours of tractor operation are recorded any time the
ignition key is rotated out of the STOP position, regardless of ignition key is rotated out of the STOP position, regardless of ignition key is rotated out of the STOP position, regardless of ignition key is rotated out of the STOP position, regardless of
whether the engine is started. whether the engine is started. whether the engine is started. whether the engine is started.
The Indicator Monitor will also remind the operator of The Indicator Monitor will also remind the operator of The Indicator Monitor will also remind the operator of The Indicator Monitor will also remind the operator of
maintenance intervals for changing the engine oil. The LCD will maintenance intervals for changing the engine oil. The LCD will maintenance intervals for changing the engine oil. The LCD will maintenance intervals for changing the engine oil. The LCD will
alternately flash the recorded hours, "CHG" and "OIL" for five alternately flash the recorded hours, "CHG" and "OIL" for five alternately flash the recorded hours, "CHG" and "OIL" for five alternately flash the recorded hours, "CHG" and "OIL" for five
minutes, after every 50 hours of recorded operation elapse. The minutes, after every 50 hours of recorded operation elapse. The minutes, after every 50 hours of recorded operation elapse. The minutes, after every 50 hours of recorded operation elapse. The
maintenance interval lasts for two hours (from 50-52, 100-102, maintenance interval lasts for two hours (from 50-52, 100-102, maintenance interval lasts for two hours (from 50-52, 100-102, maintenance interval lasts for two hours (from 50-52, 100-102,
150-152, etc.). The LCD will also flash as described above for five 150-152, etc.). The LCD will also flash as described above for five 150-152, etc.). The LCD will also flash as described above for five 150-152, etc.). The LCD will also flash as described above for five
minutes every time the tractor's engine has been started during minutes every time the tractor's engine has been started during minutes every time the tractor's engine has been started during minutes every time the tractor's engine has been started during
this maintenance interval. Before the interval expires, change this maintenance interval. Before the interval expires, change this maintenance interval. Before the interval expires, change this maintenance interval. Before the interval expires, change
the engine oil as instructed in the Maintenance section of this the engine oil as instructed in the Maintenance section of this the engine oil as instructed in the Maintenance section of this the engine oil as instructed in the Maintenance section of this
Operator's Manual. Operator's Manual. Operator's Manual. Operator's Manual.
42.0
42.0 42.0 42.0
Brake Brake Brake Brake
If the Brake light illuminates when attempting to start the If the Brake light illuminates when attempting to start the If the Brake light illuminates when attempting to start the If the Brake light illuminates when attempting to start the
tractor's engine, depress the brake pedal. tractor's engine, depress the brake pedal. tractor's engine, depress the brake pedal. tractor's engine, depress the brake pedal.
PTO (Blade Engage) PTO (Blade Engage) PTO (Blade Engage) PTO (Blade Engage)
If the PTO light illuminates when attempting to start the tractor's If the PTO light illuminates when attempting to start the tractor's If the PTO light illuminates when attempting to start the tractor's If the PTO light illuminates when attempting to start the tractor's
engine, move PTO lever into the disengaged (OFF) position. engine, move PTO lever into the disengaged (OFF) position. engine, move PTO lever into the disengaged (OFF) position. engine, move PTO lever into the disengaged (OFF) position.
Oil Oil Oil Oil
It is normal for the Oil light to illuminate while the engine is It is normal for the Oil light to illuminate while the engine is It is normal for the Oil light to illuminate while the engine is It is normal for the Oil light to illuminate while the engine is
cranking during start-up, but if it illuminate's during operation, cranking during start-up, but if it illuminate's during operation, cranking during start-up, but if it illuminate's during operation, cranking during start-up, but if it illuminate's during operation,
while the engine is running, stop the tractor immediately and while the engine is running, stop the tractor immediately and while the engine is running, stop the tractor immediately and while the engine is running, stop the tractor immediately and
check the engine oil level as instructed in this Owner's Manual. check the engine oil level as instructed in this Owner's Manual. check the engine oil level as instructed in this Owner's Manual. check the engine oil level as instructed in this Owner's Manual.
Battery Battery Battery Battery
It is normal for the Battery light to illuminate while the engine is It is normal for the Battery light to illuminate while the engine is It is normal for the Battery light to illuminate while the engine is It is normal for the Battery light to illuminate while the engine is
cranking during start-up, but if it illuminate's during operation, cranking during start-up, but if it illuminate's during operation, cranking during start-up, but if it illuminate's during operation, cranking during start-up, but if it illuminate's during operation,
while the engine is running, the battery is in need of a charge while the engine is running, the battery is in need of a charge while the engine is running, the battery is in need of a charge while the engine is running, the battery is in need of a charge
or the engine's charging system is not generating sufficient or the engine's charging system is not generating sufficient or the engine's charging system is not generating sufficient or the engine's charging system is not generating sufficient
amperage. Charge the battery as instructed in the Service amperage. Charge the battery as instructed in the Service amperage. Charge the battery as instructed in the Service amperage. Charge the battery as instructed in the Service
section of this manual or have the charging system checked by section of this manual or have the charging system checked by section of this manual or have the charging system checked by section of this manual or have the charging system checked by
your Cub Cadet dealer. your Cub Cadet dealer. your Cub Cadet dealer. your Cub Cadet dealer.
PTO / Blade Engage Knob PTO / Blade Engage Knob PTO / Blade Engage Knob PTO / Blade Engage Knob
Activating the PTO engages power to the cutting deck or other Activating the PTO engages power to Activating the PTO engages power to the cutting deck or other Activating the PTO engages power to the cutting deck or other
the cutting deck or other (separately (separately available) attachments. Pull outward on the PTO/ (separately available) attachments. Pull outward on the PTO/ (separately available) attachments. Pull outward on the PTO/
Blade Engage knob to activate it. Push the PTO/ Blade Engage Blade Engage knob to activate it. Push the PTO/ Blade Engage available) attachments. Pull outward Blade Engage knob to activate it. Push the PTO/ Blade Engage
knob inward to disengage the power to the cutting deck or other on the PTO/Blade Engage knob to knob inward to disengage the power to the cutting deck or other knob inward to disengage the power to the cutting deck or other
(separately available) attachments. activate it. Push the PTO/ Blade Engage (separately available) attachments. (separately available) attachments.
knob inward to disengage the power
NOTE: The PTO/Blade Engage knob must be in the disengaged NOTE: The PTO/Blade Engage knob must be in the disengaged NOTE: The PTO/Blade Engage knob must be in the disengaged
to the cutting deck or other (separately
(OFF) position when starting the engine. (OFF) position when starting the engine. (OFF) position when starting the engine.
available) attachments.
NOTE: The PTO/Blade Engage knob
must be in the disengaged (OFF)
position when starting the engine.
s
ectiOn
4 — c f
OntrOls and eatures
13