Installation Of Indoor Unit - LG PC09SQNSJ Manual Del Usuario

INSTALLATION MANUAL
10
Fixing Installation Plate
The wall you select should be strong and solid
enough to prevent vibration.
1
Mount the installation plate on the wall
with type "A" screws. If mounting the unit
on a concrete wall, use anchor bolts.
- Mount the installation plate horizontally
by aligning the centerline using Horizontal
meter.
SK/SJ Chassis
SR Chassis
2
Measure the wall and mark the centerline.
It is also important to use caution
concerning the location of the installation
plate. Routing of the wiring to power
outlets is through the walls typically.
Drilling the hole through the wall for piping
connections must be done safely.
SK/SJ Chassis
Place a level on raised tab
Unit Outline
C Type : 418
Ø 65
Installation Plate
C Type
C Type : 98
152
Type "A"
Screws
Installation Plate
C Type : 418
Ø 65
C Type : 134
194
(Unit : mm)
Place a level on raised tab
Unit Outline
C Type: 494
Ø 65
Measuring Tape
83
C Type: 134
Measuring Tape
Hanger
SR Chassis
Framework of Indoor Unit
86
131
(Unit: mm)

Installation of Indoor Unit

1
Hook the indoor unit onto the upper
portion of the installation plate.( engage
the three hooks at the top of the indoor
unit with the upper edge of the installation
plate) Ensure that the hooks are properly
seated on the installation plate by moving
it left and right.
Installation plate
2
Unlock the tubing holder from the chassis
and mount between the chassis and
installation plate in order to separate the
bottom side of the indoor unit from the
wall.
* The feature can be changed according to
type of model.
C Type: 504
Ø 65
83
C Type: 150
(Unit : mm)
c
d
160
213
Tubing Holder