TEFAL ClipsoMinut' Perfect Manual Del Usuario página 25

Problems
If steam leaks from
around the lid, check:
If you are unable to
open the lid:
If the food is not cooked
or is burned, check:
If food has burnt in
your pressure cooker:
If one of the
overpressure safety
systems is triggered:
If you notice the
appearance of
oxidation marks inside
the pot:
Think of the environment!
Your appliance contains valuable materials which can be
recovered or recycled.
Leave it at a local civic waste collection point.
20
All manuals and user guides at all-guides.com
Recommendations
The correct closure of the lid.
The position of the gasket.
The condition of the gasket; replace if necessary.
The cleanliness of the lid, the gasket and its
housing in the lid.
The condition of the edge of the pot.
Check that the pressure indicator (D) is in the
lowered position.
Otherwise, release steam if necessary by cooling
the pressure cooker under running cold water.
Never interfere with the pressure indicator (D).
Rinse the gasket under water and replace it in the
lid without drying it
to insert it under each of the grooves on the lid.
The cooking time.
The power of the heat source.
The correct position of the operating valve (A).
The quantity of liquid.
Fill the pot with water and soak for a while before
washing.
Never use bleach or chlorine-containing chemicals.
Turn off the heat source.
Let your pressure cooker cool down without
moving it. Wait for the pressure indicator to fall
and open the pressure cooker.
Check and clean the operating valve (A), the steam
release outlet, the safety valve and the gasket.
If the problem persists, have your pressure cooker
checked by a TEFAL Approved Service Centre.
The use of high performance stainless steel does
not prevent the appearance of oxidation in
extreme cases. If you notice oxidation marks,
remove them by rubbing with an abrasive sponge
before using your pressure cooker again.
- fig 19 and 15 and take care