cleanAIR AerTEC SeeMAX Manual Del Usuario página 6

Cover foil exchange:
RangeMAX: OptoMAX:
M
Auto A
Sensitivity
GRIND
GRIND
AerTEC™ OptoMAX airflow adjustment:
SeeMAX visor replacement:
5. Storage and shelf life
The welding helmet must be stored at room temperature and
at low humidity. Longterm storage in temperatures above
45 °C can reduce the lifetime of the battery.
6. Related product codes
Welding helmets and grinding shield:
Product code Product description
70.4441.601 Welding helmet AerTEC™
ding OptoMAX ADF, with air distribution, black
70.4441.600
Welding helmet AerTEC™
ding OptoMAX ADF, with air distribution, silver
40.1006.501
Welding helmet AerTEC™
OptoMAX ADF, without air distribution, black
40.1006.500
Welding helmet AerTEC™
OptoMAX ADF, without air distribution, silver
70.4441.660
Welding helmet AerTEC™
luding RangeMAX ADF, with air distribution
40.1010.000
Welding helmet AerTEC™
ding RangeMAX ADF, without air distribution
70.4900.020
Grinding shield AerTEC™
including air distribution
Shared spare parts for all products:
Product code Product description
40.5004.073 Front head harness sweatband
40.5004.020 Back head harness sweatband
Spare parts for RangeMAX:
Product code Product description
40.5003.263 Head harness
40.5003.600 Nose guard pad
6
SeeMAX:
STICK
You can change the direction
of the airflow by rotating the
knob positioned in the inner side
of the helmet (in front of your
forehead)
Fix the lower part of visor into
the provided opening. Then
Slide the upper part of visor
under the top selvage of the vi-
sor. Slide the side edges of the
visor into the lower grooves.
OptoMAX Air inclu-
OptoMAX Air inclu-
OptoMAX including
OptoMAX including
RangeMAX Air inc-
RangeMAX inclu-
SeeMAX Air
40.5003.520 Micro USB cover
40.5010.001 Micro USB charging cable
40.5000.270 Outside cover lens
40.5000.010 Inside cover lens
40.4028.015 Chest protection
40.4028.016 Head and neck protection
40.4028.031 Head and neck protection PAPR compatible
40.4160.400 Faceseal for PAPR
40.4551.024 Air hose holder for PAPR
Spare parts for OptoMAX:
Product code Product description
40.5001.684 40.5001.684 Replacement shell for AerTEC
40.5012.480
Welding ADF AerTEC
40.5000.210 Front cover lens
40.5003.500 Potentiometer kit
40.5000.001 Inside cover lens
40.5003.501 Cover lens clip
40.5003.250
Head harness for AerTEC
Spare parts for SeeMAX:
Product code Product description
40.4900.020 Replacement shell for AerTEC
40.5000.039 Protection film for the visor
40.5000.038 Polycarbonate grinding visor
40.5000.047 Acetate protection visor
40.5000.048 Plasma visor (shade 5)
40.4551.024 Hose holder
40.5003.263 Head harness
40.4156.010 Faceseal SeeMAX
40.5011.130 Hard hat
7. Approved combinations
Product code Product description
30 00 00* CleanAIR® AerGO
81 00 00* CleanAIR® Basic EVO
51 00 00* CleanAIR® Chemical 2F
67 00 00* CleanAIR® Pressure Flow Master
* including all derived variants
Standards related to products:
Standard: Notified body for the CE approval:
EN 166:2001 ECS GbmH - European Certification Service
EN 175:1997-08 Notified Body 1883, Hüttfeldstrasse 50,
EN 379:2003 43430 Aalen, Germany
Occupational Safety Research Institute,
EN 12941:1998
v.v.i., Notified body 1024 Jeruzalémská
EN 14594:2005
1283/9, 110 00, Prague 1, Czech Republic
Declaration of Conformity is available at:
https://www.clean-air.cz/doc
™
OptoMAX
™
OptoMAX
™
OptoMAX
™
SeeMAX