Pramac group MP 34-2 Manual De Uso Y Mantenimiento página 11

TROUBLE SHOOTING:
THE PUMP DOES NOT SUPPLY A SUFFICIENT RATE OF FLOW
AIR INFILTRATION DURING SUCTION
NO
THE SUCTION PIPE DIAMETER IS NOT
LARGE ENOUGH
NO
CHECK OTHER POSSIBLE CAUSES
MENTIONED IN THE PREVIOUS
SECTION
NO
TAKE THE MOTOR PUMP TO THE
NEAREST SERVICE CENTER
TROUBLE SHOOTING:
PUMP PRESSURE IS NOT SUFFICIENT
LIQUID VISCOSITY IS HIGHER THAN
THE ONE WHICH IS RECOMMENDED
FOR THE LIQUIDS TO ENTER THE
PUMP
NO
LOW PUMP R.P.M.
NO
CHECK OTHER POSSIBLE CAUSES
MENTIONED IN THE PREVIOUS
SECTION
NO
TAKE THE MOTOR PUMP TO THE
NEAREST SERVICE CENTER
TROUBLE SHOOTING:
THE ENGINE DOES NOT START:
IS THERE ANY FUEL IN THE TANK?
YES
IS THE FUEL TANK TAP OPEN? ⊗
YES
IS THERE AIR IN THE FEEDING
CIRCUIT? ⊗⊗
NO
IS THE CHOKE ON? ⊗⊗⊗
YES
IS THERE OIL IN THE ENGINE?
YES
IS THE SPARK PLUG CONNECTED?
⊗⊗⊗
YES
TAKE THE MOTOR PUMP TO THE
NEAREST SERVICE CENTRE
IENI
CHECK THE COUPLING TIGHTENING
YES
AND INSPECT THE SUCTION PIPE
YES REPLACE THE SUCTION PIPE
FOLLOW THE CORRESPONDING
YES
INSTRUCTIONS
PUMP A LIQUID HAVING A LOWER
YES
VISCOSITY
INCREASE MOTOR PUMP R.P.M.
YES DO NOT EXCEED THE MAX.
RECOMMENDED R.P.M.
FOLLOW THE CORRESPONDING
YES
INSTRUCTIONS
NO FILL TANK
NO OPEN
YES ELIMINATE
NO ACTION
NO FILL UP
NO CONNECT
⊗ ONLY WHEN FORESEEN
⊗⊗ ONLY FOR DIESEL ENGINE
⊗⊗⊗ ONLY FOR EXPLOSION ENGINE
5-6
TECHNICAL DETAILS AND SPECIFICATIONS:
Model MP34-2 MP36-2
Engine Honda GX160 Honda GX120
Max power (kW) 4,0 2,9
n (rpm) 3600 3600
Displacement (cc) 163 118
Self-winding recoil Self-winding recoil
Starting
start start
Total head (m) 30 30
Max delivery (l/min) 700 600
Suction diameter 2" 2"
Delivery diameter 2" 2"
Tank capacity (l) 3,6 2,5
Dry weight (kg) 30 30
IENI
MP56-3 MP66-3
Honda GX160 Honda GX240
4,0 5,9
3600 3600
163 242
Self-winding recoil Self-winding recoil
start start
26 27
930 1340
3" 3"
3" 3"
3,6 6
26 27
6-6