Precautions For Safety - Toshiba RAV-GM901ATP-E Manual De Instalación

1

Precautions for safety

The manufacturer shall not assume any liability for the damage
caused by not observing the description of this manual.
WARNING
General
• Before starting to install the air conditioner, read carefully
through the Installation Manual, and follow its instructions to
install the air conditioner.
• Only a quali ed installer(*1) or quali ed service person(*1) is
allowed to install the air conditioner. If the air conditioner is
installed by an unquali ed individual, a re, electric shocks,
injury, water leakage, noise and/or vibration may result.
• Do not use any refrigerant different from the one speci ed
for complement or replacement. Otherwise, abnormally high
pressure may be generated in the refrigeration cycle, which
may result in a failure or explosion of the product or an injury to
your body.
• When transporting the air conditioner, use a forklift and when
moving the air conditioner by hand, move the unit with 2 people.
• Before opening the intake grille of the indoor unit or valve cover
of the outdoor unit, set the circuit breaker to the OFF position.
Failure to set the circuit breaker to the OFF position may result
in electric shocks through contact with the interior parts. Only a
quali ed installer(*1) or quali ed service person(*1) is allowed
to remove the intake grille of the indoor unit or valve cover of
the outdoor unit and do the work required.
• Before carrying out the installation, maintenance, repair or
removal work, be sure to set the circuit breaker to the OFF
position. Otherwise, electric shocks may result.
• Place a "Work in progress" sign near the circuit breaker while
the installation, maintenance, repair or removal work is being
carried out. There is a danger of electric shocks if the circuit
breaker is set to ON by mistake.
7-EN
• Only a quali ed installer(*1) or quali ed service person(*1) is
allowed to undertake work at heights using a stand of 50 cm or
more.
• Wear protective gloves and safety work clothing during
installation, servicing and removal.
• Do not touch the aluminum n of the outdoor unit. You may
injure yourself if you do so. If the n must be touched for some
reason, rst put on protective gloves and safety work clothing,
and then proceed.
• Do not climb onto or place objects on top of the outdoor unit.
You may fall or the objects may fall off of the outdoor unit and
result in injury.
• When working at heights, use a ladder which complies with the
ISO 14122 standard, and follow the procedure in the ladder's
instructions. Also wear a helmet for use in industry as protective
gear to undertake the work.
• When cleaning the lter or other parts of the outdoor unit, set
the circuit breaker to OFF without fail, and place a "Work in
progress" sign near the circuit breaker before proceeding with
the work.
• When working at heights, put a sign in place so that no-one will
approach the work location, before proceeding with the work.
Parts and other objects may fall from above, possibly injuring a
person below.
• You shall ensure that the air conditioner is transported in stable
condition. If any part of the product is broken, contact the
dealer.
• Do not modify the products. Do not also disassemble or modify
the parts. It may cause a re, electric shock or injury.
• This appliance is intended to be used by expert or trained users
in shops, in light industry, or for commercial use by lay persons.
– 4 –
EN
8-EN