Care And Cleaning - Rampage JL Instrucciones De Instalación

Installation Steps With L-Shaped Bracket
4
Re-install the L-Shaped bracket between the bumper
and frame crossmember.
Position the L-Shaped bracket so that the large holes
are over the welded nuts on the Tow Hitch.
5
Re-install factory hardware at outer hole locations
through the Tow Hitch, frame crossmember to the
welded nuts on the L-Shaped bracket.
While installing the Left (driver) side bolt, install the
Trailer Wiring Plug Bracket between the Tow Hitch
and L-Shaped bracket.
Snug but do not tighten hardware.
6
Check hitch is level and centered on the vehicle.
Tighten hardware.
Re-install hardware connecting L-Shaped bracket to bumper.
Tighten all bumper hardware.

Care and Cleaning

Regularly inspect the installation to make sure that all hardware is secure and tight.
wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any
type of polish or wax that may contain abrasives that could damage the finish. Use mild soap to clean the Tow Hitch.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International. We take the utmost pride in our products
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms
of fit, durability, finish and ease of installation.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
800-328-2409 • Visit us at Rampageproducts.com
© 2018 Lund Motion Products, Inc. All rights reserved.
Rampage Products™ is a trademark of Lund Motion Products, Inc.
NOTE: Actual application may vary slightly from illustrations.
Re-use
factory bolt
Trailer Wiring Plug
Bracket
Page 4 of 4
Re-use
factory bolt
To protect your investment,