Publicidad
PRELIMINARY REV. 06
Installation manual
Hereunder you will find the described procedure. The example is made taking into account an
hypothetic personal code (PIN) 2341:
PIN CODE
PIN CODE = 2341
EXAMPLE
OFF
ON
ON
+
a
IGN
MAX 5 SEC.
ON
LED ON X 2
b
3 4 1
ON
c
2
4 1
ON
d
2 3
1
ON
LED ON X 1
e
2 3 4
ON
14
GB
06DE1429C ok.p65
14-15
All manuals and user guides at all-guides.com
ON 3 SEC.
OFF
OFF
ON
+
=
OK
IGN
IGN
OFF
OFF
LED ON X 3
LED ON X 4
OFF
OFF
OK
PRELIMINARY REV. 06
VOLUMETRIC SENSOR AND PERIMETRIC PROTECTION
FUNCTIONAL TEST
Carry out the test operations in the indicated sequence after having shut doors, bonnet and boot.
The test operations must be carried out
within the 40 seconds inhibition phase
be generated (siren and blinker) once this time has elapsed.
VOLUMETRIC PROTECTION TEST
Shut doors, bonnet and boot,
keeping the two windows of the
same side lowered about 10
centimeters. Make sure that there
is nothing able to move inside the
passenger compartment.
Arm the alarm by pressing the
button.
Insert a hand into the vehicle and
wave it about on a level with the
front seat headrest. If the LED starts
blinking quickly or the buzzer issues
a sound that means the sensor is
working properly.
Disarm the alarm by pressing the
button and close the windows.
Arm the alarm by pressing the
button and hit each window with
the fist. The LED has to go on
blinking in the same way and the
buzzer must not sound.
9-05-2001, 11:05
Installation manual
. An alarm status will
PERIMETRIC PROTECION TEST
Arm the alarm pressing the button
of the remote control. The doors
will lock.
The LED will flash.
Await for 5 seconds.
Open the door with the key. The
buzzer will issue a continuous
sound. The LED will flash.
Shut the door.
Repeat the test for the other
connected doors, the bonnet and
boot.
Disarm the alarm by pressing the
button of the radio control. The
doors will unlock and the LED will
switch off.
15
GB
Publicidad
