Cybex Silver PALLAS M-FIX SL Manual Del Usuario página 11

REMOVING AND REATTACHING THE SEAT COVER
The cover of the car seat consists of 4 parts (Headrest, backrest, booster and
impact shield). These are held in position at several places by press-studs.
Once all studs have been released, the single parts of the cover can be
removed.
In order to put the covers back on the car seat, follow the removal instructions
in the reverse order.
The cover may only be washed at 30 °C with a delicate wash program
��
otherwise it may result in discolouration of the cover fabric. Please wash
the cover separately from other laundry and do not dry in the dryer or in
direct sunlight!
MANUFACTURER'S WARRANTY AND DISPOSAL REGULATIONS
CYBEX GmbH (Riedingerstr. 18, 95448 Bayreuth, Germany) gives you
3 years warranty on this product. The warranty is valid in the country, where
this product was initially sold by a retailer to a customer. The contents of
the guarantee and all essential information required for the assertion of
the guarantee can be found on our homepage go.cybex-online.com/
manufacturer-warranty-car-seats. If a warranty is shown in the article
description, your legal rights against us for defects remain unaffected.
Please observe the waste disposal regulations in your country.
EN
9