Gauge Consumption, Energy Savings; Setting The Comfort Mode Temperature; Consumption Indication Accumulated In Kwh, Energy Savings; Child Anti-Tamper, Keypad Lock/Unlock - Cordivari RF Manual De Uso

English
Scf and the setting temperature Super Comfort appears on the display.
The Super Comfort stops if:
- The diff erence is less or equal to 0,5°C.
- The diff erenza is always higher than 2°C after 1 hour of Super Comfort.
Comment : The Super Comfort is only valid in Comfort mode and Auto
mode.

3.5 Gauge consumption, energy savings

In the device display, an indicator shows the energy comsumption level
by positioning in front of the colour: red, orenge or green. You can choose
your level of energy usage, depending on the setting temperature. As
the temperature setting increases, the consumption will be higher. The
gauge appears in Auto, Comfort, Eco and Frost protection modes and
whatever the temperature level.
C - Red colour
Setting teperature
High Temperature
level: it is advisable
When the setting
to signifi cantly
temperature is higher
reduce the setting
than 22°C
temperature.
B - Orange colour 19°C <Setting
Average tempe- teperature ≤ 22°C
rature level: it is When the setting tem-
advisable to slightly perature is higher than
reduce the setting 19°C and lower or equal
temperature.
Setting teperature
A - Green colour
When the setting tempe-
Ideal settings.
rature is lower or equal

3.6 Setting the Comfort mode temperature

You can access the Comfort temperature set up from the Auto and Comfort
Modes. It is preset to 19°C. Using the rotary dial, you can adjust the
temperature from 7°C to 30°C by intervals of 0.5°C.
Note: you can limit the Comfort temperature (for more details see the
specifi c chapter).

3.7 Consumption indication accumulated in KWH, energy savings

It is possible to see the estimation of energy consumption in KWH since
the last reset of the energy meter.
• Display of the estimated power consumption
To see this estimation, from Auto, Comfort, Eco or Frost protection mode,
then press . To exit the display mode of consumption: press
or , the device returns automatically in the previous active mode.
> 22°C
to 22°C
≤ 19°C
to 19°C
• Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost protection
mode, then proceed as follows.
1- Press .
2- Press simultaneously
exit resetting the energy meter, press any button, the devices returns
automatically in the previous active mode.

3.8 Child anti-tamper, keypad lock/unlock

• Keypad lock
To lock the keypad, press and hold the
seconds. The padlock symbol
locked.
• Keypad unlock
To unlock the keypad, press and hold the
seconds again. The padlock symbol
is unlocked.
Important: when the keypad is locked, only the button (or switch) is active.
If the device is on Standby mode when the keypad is locked, you have to
unlock it for the next heating on to access the setup.

3.9 7 day and daily programme integrated, energy savings

3.9.1. Automatic programming with self-lkearning process
This feature is available on products equipped with occupancy detector.
• Overview
Auto-programming (Auto): After an initial learning period of one week, the
device will analyze occupancy cycles to determine and implement a weekly
programme adapted to your lifecycle alternating periods in comfort and
periods in eco, the goal being to deliver the most effi cient yet comfortable
and user focused heating cycle. The products algorithm will perpetually
learn and adapt to changes in your occupancy patterns, adapting week after
week to optimize the heating programme to any changes in your evolving
- 28 -
and for more than 5 seconds. To
and buttons for 10
appears on the display, the keypad is
and buttons for 10
disappears from the display, keypad
Cod. 1910000000274 - nv01