Cordivari RF Manual De Uso página 30

English
5- To change and/or allocate programmes, press
day mode, press 3 times.
• Programmes choices
Schematic sequence of programmes:
→ →
Auto Comfort Eco
Version with occupancy detector: The device is delivered by default with the
self-learning mode enabled. If this programme suits your requirements, you
have nothing more to do, the device, after the initial 7 day learning period will
follow the autoprogramme which will continue to tailor itself to your occupancy
cycles. Other version: your device's default setting is non-stop Comfort for 7
days a week.
• Programmes overview
- Auto: Auto-programming (See Automatic programming with selfl earning
process).
- Comfort: Your device will operate in Comfort mode, 24 hours a day, for wach
day selected.
Nota: You can se the Comfort mode temperature to the temperature you
require (see the Setting the Comfort mode temperature section).
- Eco: The device will operate 24 hours a day in Eco mode.
Nota: You can set the temperature lowering parameters.
- P1: Your device will operate in Comfort mode from 06:00 to 22:00 (and in Eco
mode from 22:00 to 06:00).
- P2: Your device will operate in Comfort mode from 06:00 to 09:00 and from
16:00 to 22:00 (and in Eco mode from 09:00 to 16:00 and from 22:00 to 06:00).
- P3:Your device will operate in Comfort mode from 06:00 to 08:00, from 12:00
to 14:00 and from 18:00 to 23:00 (and in Eco mode from 23:00 to 06:00, from
08:00 to 12:00 and from 14:00 to 18:00).
• Potential modifi cations of programmes
If the default time schedules for the P1, P2 and P3 programmes do not suit
your routines, you can change them.
Modifying the P1, P2 o P3 programmes.
If you modify the time schedules for the P1, P2 or P3 programmes, the
schedules will be modifi ed for all the days of the week for which P1, P2 or P3
had been set.
1- If you just set the time and day, go to step 2.
From Auto, Comfort, Eco or Frost protection mode, press
When the cursor moves above the setting time symbol
. To exit the time and
→ → →
P1 P2
for 5 seconds.
press
2- Press or
P3
3- With or
P1 will fl ash. Press
4- The P1 start time (which by default is 06:00) will fl ash. Using
you can change this time, by increments of 3 minutes.
shortly.
Save by pressing
- 30 -
. prog appears.
, select P1.
for 5 seconds to make changes.
5 sec.
.
Cod. 1910000000274 - nv01
or