Dual Optimization Feature; Pin Code Lock - Cordivari RF Manual De Uso

English
2- Press or .
On = Occupancy detection enabled.
OFF = Occupancy detection disabled.
3- To save and move to the next setting, press
settings, press 3 times.

5.3 Dual optimization feature

This feature is available on the device equipped with occupancy detector.
• Overview
- Dual function optimization, priority to comfort or energy savings, the
choice is yours, depending on various parameters: room inertia, ambient
temperature, desired temperature, the device calculates and optimizes
the programming for each heating period whether set to Comfort or
Savings (Eco):
- In OPTI ECO mode (effi ciency priority), the device's inbuilt algorithms
will calculate the best compromise in order to guarantee maximum energy
savings throughout the programmed increase and decrease phases.
In this mode, a slight drop in the temperature level at the beginning and
end of the comfort period is allowed to maximize energy savings.
- In OPTI COMFORT mode (priority to comfort), the device's intelligence
calculates the best compromise in order to guarantee maximum comfort
during the programmed increase and decrease phases.
In OPTI COMFORT mode, the priority is given to anticipating and
maintaining the comfort temperature during periods of detected
occupancy .
• Optimization choice
The OPTI COMFORT mode is activated by default.
The word OPTI will appear briefl y on the display then it will alternate with
the set mode CoNF, ECO or OFF.
1- Press
COnF = Optimisation feature activated for OPTI Comfort mode, priority
To exit the installer to comfort.
ECO = Optimisation feature activated for OPTI ECO mode, priority to
energy effi ciency.
OFF = Optimisation feature disactivated.
2- To save and move to the next setting, press
settings, press

5.4 PIN code lock

• Overview
Your heating device is protected by a safety code against unauthorised
use. The PIN code (Personal Identity Number) is a customisable 4
numbers code. When enabled, it prevents access to the following
settings:
- Selecting the Comfort mode: The access tothe Comfort mode is
forbidden, only the Auto, Eco and Frost protection modes are available
- Minimum and maximum limits of the setting temperature range (the
Comfort temperature modifi cation is forbidden out of the authorised
setting range).
- Programming mode.
- Open window detection settings.
- Setting the Eco mode temperature lowering-level.
- Setting the Frost protection temperature.
Version with occupancy detector, in addition:
- Occupancy detection settings.
- Optimization choice.
3 important steps are needed for the fi rst use of the PIN code lock:
1 - PIN code initialisation, enter the preset PIN code (0000) to access
the feature.
2 - Activation of the PIN code, to lock settings which will be protected by
the PIN code.
3 - Customizing the PIN code, replace 0000 by the custmized code.
• PIN code initialisation
By default, the PIN code is not enabled.
1- OFF appears on the display.
- 36 -
or .
3 times.
To exit the installer
Cod. 1910000000274 - nv01