Setting Of The Maximum Duration Of Authorised Boost; Setting Of The Maximum Ambient Temperature For The Automatic Stop Of The Boost; Restoring Factory Settings (Only If Pin Code Is Desabled) - Cordivari RF Manual De Uso

English
intervals of 1°C.
7- To change the maximum temperature setting, press
To save and move to the next setting, press
press twice.

4.6 Setting of the maximum duration of authorised Boost

The maximum duration of Boost is preset at 60 min. You can adjust it from 30
to 90 min, by intervals of 30 min.
8- The Boost symbol and the heating indicator appear on the display and the
preset duration of 60 min fl ash.
9- Press or to display the desires duration.
10- To save and move to the next setting, press
settings, press twice.
4.7 Setting of the maximum ambient temperature for the automatic
stop of the Boost
When the Boost is enabled, the device has to heat the room until the
temperature limit: the maximum ambient temperature. When it is reached, the
Boost stops automatically. It is preset at 35°C, you can adjust it from 25°C to
39°C by intervals of 1°C.
The Boost symbol and the heating indicator appear on the display and
the maximum temperature fl ashes.
11- You can set the Boost maximum temperature by pressing
or
12- To save and move to the next setting, press
. To exit the user settings, settings, press

4.8 Restoring factory settings (only if PIN code is desabled)

In order to return to the factory settings, proceed in the following order:
1- From the maximum ambient temperaturre setting, press
rEST appears on the display.
2- no Appars . Press
. To exit the user
YES = Factory settings reset.
no = Factory settings not reset.
3- Press
and goes back automatically to the home display of the user settings.
- 34 -
from 25°C to 39°C by intervals of 1°C.
twice.
or to select YES.
for 5 seconds. The device returns to its initial confi guration
or
. To exit the user
.
Cod. 1910000000274 - nv01