Setting The Eco Mode Temperature Lowering-Level; Setting The Frost Protection Temperature; Super Comfort Activation/Deactivation; Comfort Setpoint Temperature Limit - Cordivari RF Manual De Uso

Setting sequence :
Eco mode temperature lowering-level → Frost protezione temperature
→ Super comfort → Comfort setting temperature limits → Maximal Boost
duration → Maximum ambient temperature → Restoring factory settings

4.2 Setting the Eco mode temperature lowering-level

The drop in temperature is set at -3,5°C compared to the set temperature of the
Comfort mode. You can adjust the lowered level from -1°C to -8°C, by intervals
of 0,5°C.
Important: whatever the lowering level set, the Eco setting temperature will
never exceed 19°C.
1- Press or to obtain the temperature level you require.
2- Press to save and move to the next setting.
To exit the user settings, press

4.3 Setting the frost protection temperature

Your device is preset at 7°C. You can adjust the Frost protection temperature
from 5°C to 15°C by intervals of 0,5°C.
3- Press or to obtain the temperature you require.
4- Press to save and move to the next setting. To exit the user
settings, press twice.
Cod. 1910000000274 - nv01
twice.

4.4 Super Comfort activation/deactivation

By default, the Super Comfort is enabled.
SCF appears, then YES fl ashes on the display. The Boost symbol and
the heating indicator appear on the display.
5- Press or to enable or disable the Super Comfort.
YES = Super Comfort enabled.
no = Super Comfort disabled.
To save and move to the next setting, press
press twice.

4.5 Comfort setpoint temperature limit

You can limit the setting temperature range by introducing a maximum and/or
minimum setting, preventing unintentional changes in temperature.
• Low temperature limit
Locking of the setting range using a minimum temperature stop, preventing
the temperature from being set below that temperature. The minimum setting
is preset to 7°C. You can adjust from 7°C to 15°C by intervals of 1°C.
6- To change the minimum temperature setting, press
then save by pressing
the device changes automatically to set the maximum setting. To exit the user
settings, press twice
• High temperature limit
Locking ofthe setting range using a maximum temperature increase,
preventing the temperature from being set above that temperature. The
maximum setting is preset to 30°C. You can adjust from 19°C to 30°C by
- 33 -
. To exit the user settings,
. If you do not want to change it, press
English
or
: