Open Window Detection, Energy Savings; User Settings; Access - Cordivari RF Manual De Uso

English
5- Once you have chosen a programme for each day, confi rm your selection
by pressing .
The days of the week will succesively scroll on display with the programmes
that you set for them (P1, P2, P3, CONF or ECO). To exit the programme
viewing mode, press twice.
• Viewing the programmes that you have selected
- From Auto, Comfort, Eco or Frost protection mode, press
Press twice, the programme for each day of the week (Comfort, Eco,
P1, P2 or P3).
- To exit the programme viewing mode, press
• Manual and temporary exemption from a running programme
This function allows you to change the setting temperature temporarily until
the next scheduled change in temperatre or the transition to 00:00.
Example :
1- By using the rotary dial, you can change temporarily the desired temperature
up to 18°C for example.
Note: The cursor corresponding to the operation mode, i.e Eco mode in our
example, is blinking during the duration of the temporary derogation.
3- This change will be automatically cancelled at the next change of
programme or transition to 00:00.

3.10 Open window detection, energy savings

• Overview
Lowering temperature cycle by setting frost protection during ventilation
of a room by opened window. You can access the open window detection
from the Comfort, Eco and Auto modes.
- Automatic activation, the lowering temperature cycle starts as soon as
the device detects a temperature change.
• Automatic activation (factory settings)
The device detects a temperature fall. An opened window, a door to the
outside, can cause this temperature fall.
Note: The diff erence between the air from the inside and the outside
must cause a signifi cant temperature fall to be perceptible by the device.
This temperature drop detection triggers the change to Frost Protection
mode.
for 5 seconds.
• Frost protection digital meter
When the device performs a lower temperature cycle due to opened
twice. window, a meter appears on the display to show he cycle time. The
counter is automatically reset the next time Frost protection by opened
window is activated (automatic or manual activation).
• Stop the Frost protection mode
By pressing any button, you stop the Frost protection mode.
Note: If a temperature rise is detected, the device may return to the
previous mode (active mode before the open window detection).

4. User settings

4.1 Access

Access to the User settings in 2 steps: From Auto, Comfort, Eco or Frost
protection mode:
1- Press
2- Press
User = User settings is displayed
- 32 -
for 5 seconds.
briefl y twice.
Cod. 1910000000274 - nv01