Installer Settings; Access; Confi Guration Of Detection Modes - Cordivari RF Manual De Uso

The following factory values will be eff ective:
Parameters
Comfort setting temperature
Boost duration
Keypad lock
User settings
Eco mode temperature lowerin glevel
Frost protection temperature
Super Comfort
Minimum set of Comfort setting
temperature
Maximum set of Comfort setting
temperature
Maximal Boost duration
Maximum ambient temperature
for the automatic stop of the Boost
Press to exit the user settings.

5. Installer settings

5.1 Access

To access the Installer settings in steps: From Auto, Comfort, Eco or
Frost protection mode:
1- Press for 5 seconds.
2- Press briefl y twice.
Cod. 1910000000274 - nv01
Factory settings
Operating
19°C
60 min.
Disabled
60 min.
-3,5°C
7°C
Enabled
7°C
30°C
60 min.
35°C
USEr = User settings is displayed .
3- Press for 10 seconds.
InSt= Installer settings is displayed.
Press briefl y.
Setting sequence :
Confi guration of detection modes → Dual optimization feature → PIN code
lock → Restoring factory settings.
5.2 Confi guration of detection modes
• Open window detection, activation/deactivation of the Auto
mode
The default setting of the automatic mode is enabled.
1- Press or .
On = Automatic mode enabled.
OFF = Automatic mode disabled.
2- To save and move to the next setting, press
settings, press 3 times.
• Occupancy detection, activation/deactivation
1- The occupancy detection enabled is the default setting.
- 35 -
English
To exit the installer