Dash Disassembly; For Models Without A 4.2-Inch Display Screen; For Models With A 4.2-Inch Display Screen - Metra 99-5835G Instrucciones De Instalación

For models without a 4.2-inch
display screen:
1. Unclip the dash panel above the
radio. (Figure A)
2. Remove (2) screws securing the
factory radio/trim panel. (Figure B)
3. Unclip the factory radio/trim panel
from the dash, unplug and remove.
(Figure B)
Continue to kit preparation

Dash Disassembly

(Figure A)
(Figure B)
99-5835G
For models with a 4.2-inch display
screen:
1. Unclip and remove the trim panel
above the 4.2-inch display screen.
(Figure A)
2. Remove the (2) screws securing the
display (one on either side of the
screen), then unclip, unplug, and
remove the screen.
Note: The display will not be
reused in this application.
3. Remove the (2) screws now
exposed, then unclip and remove the
top trim panel. (Figure B)
4. Remove (2) screws securing the
factory radio/trim panel. (Figure C)
5. Unclip the factory radio/trim panel
from the dash, then unplug and
remove. (Figure C)
Continue to kit preparation
2
(Figure A)
(Figure B)
(Figure C)