Starting The Program - Ivoclar Vivadent Programat CS6 Instrucciones Breves

Idiomas disponibles

4. Operation

Switching on

Connect the power cord with the power supply. Put the On/Off switch at the rear of

the device on position "I".

After the self-test of the device, the Home screen appears. All functions of the

Programat can be selected via this screen. To change to the Home screen, press

the HOME key.

Selecting the program

Select the desired program using the [Arrow] buttons.

Loading the furnace

Open the furnace head by pressing the OPEN FURNACE HEAD key and place the

object to be fired in the furnace.

Detailed information on loading the furnace can be found in Chapter 2.3.1 in the

Operating Instructions as well as in the Instructions for Use of the respective material.

Starting the program

Press the START key to start the program. The LED lights up in red. The remaining

time of the program is shown in the display.

The furnace head opens automatically at the end of the program.

Tabla de Contenido