Ivoclar Vivadent Programat CS6 Instrucciones Breves página 9

5. Editing the firing parameters
Press the [Parameters] button in the program screen.
By pressing the firing curve, you will reach the parameter view.
Press the [T] button.
Enter the desired holding temperature and confirm with the green button.
The holding temperature has been successfully changed. All other parameters shown
in the firing curve can be changed / edited in the same way.
Predrying
For zirconia:
– "Off" for dry machining or "ZrO
2
For the crystallization program:
– "Cryst." for crystallization alone or in conjunction with the glaze spray
– "Glaze" for spray or paste
Predrying must always be activated for crystallization programs.
Ivoclar Vivadent programs are partially blocked and cannot be edited. Please refer to the Operating Instructions for more comprehensive
information about the operation.
wet" for wet machining
9