Trix H0 BR VT 11.5 Manual Del Usuario página 37

Important: Changes in the settings marked with
for the Selectrix mode of operation automatically
lead to changes in the DCC mode of operation
and vice versa!
Settings for different parameters:
CV
1
3
4
*
5
17
18
29 bit 0: Travel direction polarity reversal + lighting
*
49
*
50
*
51
Other changes are not possible. The values set at
the factory have been selected to insure trouble-free
operation.
Description
address
acceleration delay
braking delay
maximum speed
Extended address (Upper part)
Extended address (Lower part)
bit 1: number of speed levels 14 / 28
bit 5: address size 7 bit / 14 bit
pulse width for motor control
Rule variant
bit 0: Motor polarity reversal
bit 1: Only lighting polarity reversal
Bit 2: Track polarity reversal
* Both powered end cars must always be functionally
connected to one another on the programming track
in order to program the train properly.
CV 29 Bit 5 = 1
CV 29 Bit 5 = 1
The operating instructions for your central unit
(example: Central-Control 2000) will give you exact
procedures for setting the different parameters.
With many systems the values set at the factory
can be read in the programming mode.
DCC Value Selectrix Value
1 – 99
0 – 127
0 – 127
1 – 7
not necessary
not necessary
0 / 1 not necessary
0 – 3
0 - 3
0 / 1 not necessary
1 – 99
1 – 7
1 – 7
1 – 7
1 – 4
1 – 4
37