Troubleshooting - vitapur GWF8BLK Manual De Instrucciones

Troubleshooting

Problem
Water is
leaking out
Water will not
filter
Note:
Do not return this product to the store. For questions on operation, assembly or
parts, please contact Customer Service at 1-877-447-4768 and ask for assistance
Possible Cause
The water filtration system is not
sitting level or the float mechanism
is obstructed.
The float seal is not inserted
correctly or is not sealing due
to residue or charcoal particles.
Float mechanism is sticking.
Water is leaking between upper
and lower chambers.
Pre-filtration system or filter
is blocked.
Suggested Solution
Make sure the water filtration
system is sitting level on the water
dispenser (make sure the bottle
support collar or the spike has been
removed).
Ensure the float seal is inserted
correctly and any residue is
wiped away.
Inner float is caked with residue.
Remove silicone float seal and
separate inner float. Wipe clean and
re-assemble.
Drain water from dispenser taps
to bring water level in bottom
chamber to max level line.
Do not add water to the upper
chamber if the lower chamber is
full.
To release air lock, lift upper
chamber and unscrew filter. Shake
filter or tap gently on countertop.
Screw filter back into upper
chamber.
Filter was not soaked for 30
minutes prior to use. Soak filter.
If blocking persists, replace with
new Vitapur® Long Life Filter.
.