Beretta EXCLUSIVE MIX C.S.I. Manual Para La Instalación Y El Uso página 24

MIX R.S.I.: programmable parameters
N° DESCRIPTION PARAMETERS
PAR.
1 GAS TYPE
2 BOILER POWER
3 INSULATION LEVEL OF BUILDING (+) (*)
10 DHW MODE
11 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
12 WATER TANK MAXIMUM SET-POINT
13 DELIVERY TERMPERATURE EXT. WATER TANK
14 DELTA EXTERNAL WATER TANK (ON)
20 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
21 HEATING CIRCUIT MAXIMUM SET-POINT
22 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
28 MAX HEATING POWER REDUCTION TIMER
29 FORCED HEATING SHUT DOWN TIMER
30 HEATING TIMER RESET FUNCTION
40 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
41 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
42 S.A.R.A. FUNCTION
43 S.A.R.A. BOOSTER FUNCTION
44 THERMOREGULATION FUNCTION
45 INCLINATION OF THERMOREG. CURVE (OTC) (*)
48 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
50 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
61 DHW ANTIFREEZE FUNCTION TEMPERATURE (ON)
62 HEATING ANTIFREEZE FUNC. DELIVERY TEMP. (ON)
85 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
86 THIS PARAMETER IS NOT USED ON THIS MODEL. DO NOT MODIFY
(*) parameters shown only with external sensor connected and parameter 44 in 1 (AUTO).
(+) for well-insulated buildings select values close to 20, for badly insulated buildings choose values close to 5.
Parameter 45 "Inclination of thermoregulation curve (OTC)"
The curve must be chosen according to the geographical area and the type of installation.
T m. - 20
OTC =
10 x
20 - T e.
UNIT OF
MEASURE
°C
° C
° C
° C
min
min
°C
°C
T m. = maximum rated temperature of heating water
T e. = minimum rated external temperature
MIN
- 1 Methane
2 LPG
3 Methane FR
- 26 (26kW)
30 (30kW)
34 (35kW)
- 5
0 (OFF)
1 (Istantaneous)
2 (Mini-tank)
3 (Ext. water tank with therm. - A and B case)
4 (Ext. water tank with sensor - C case)
40
50
0
45
0
0
- 0
0 (OFF)
1 (AUTO)
0 (OFF)
1 (AUTO)
0 (OFF)
1 (AUTO)
- 2,5
0
0
24
MAX DEFAULT
(setted
in factory)
1-2
26-30-34
20 5
3
60
80 60
80 80
10 5
1
80 80
40
20 15
20 3
1 0
1
1
1
1
1
40 20
0
1
10 4
10 6
0
0.6
PARAMETERS
setted by techn.
assist. centre)