Room Thermostat - Airwell AW-WHPMA18-H93 Manual De Instalación

If you only set WATER FLOW TEMP. to YES, or only set ROOM TEMP. to YES, The following pages will be displayed.
only WATER FLOW TEMP. YES
If you set WATER FLOW TEMP. and ROOM TEMP. to YES, meanwhile set DOUBLE ZONE to NON or YES, the following
pages will be displayed.
In this case, the setting value of zone 1 is T1S,the setting value of zone 2 is TS(The corresponding TIS2 is calculated according
to the climate related curves.)
If you set DOUBLE ZONE to YES and set ROOM TEMP. to NON, meanwhile set WATER FLOW TEMP. to YES or NON,the
following pages will be displayed.
In this case, the setting value of zone 1 is T1S,the setting value of zone 2 is T1S2.
If you set DOUBLE ZONE and ROOM TEMP. to YES, meanwhile set WATER FLOW TEMP. to YES or NON,the following page
will be displayed.
In this case, the setting value of zone 1 is T1S,the setting value of zone 1 is TS (The corresponding TIS2 is calculated according
to the climate related curves.)

10.7.6 ROOM THERMOSTAT

About ROOM THERMOSTAT
The ROOM THERMOSTAT is used to set whether the
room thermostat is available.
How to set the ROOM THERMOSTAT
Go to MENU> FOR SERVICEMAN> 6.ROOM THERMO-
STAT. Press OK. The following page will be displayed:
◄
Homepage (zone 1)
Addition page (zone 2)(Double zone is effective)
◄
Homepage (zone 1)
◄
Homepage (zone 1)
Addition page (zone 2)(Double zone is effective)
48
only ROOM TEMP. YES
2
2
Addition page (zone 2)
2
6 ROOM THERMOSTAT
6.1 ROOM THERMOSTAT
ADJUST
NON