The Following Screen Is Displayed During Setup; The Access Points Dialog Box Is Displayed During Setup - Canon PIXMA MP600R Manual De Instrucciones

The following screen is displayed during setup

Problem
The Access Points dialog box is
displayed during setup
Possible Cause and Measures
The Access Points dialog box is displayed when:
No access point is detected.
Multiple access points are detected.
Entry of a network key is necessary to communicate with the target access
point.
Select the target access point, then perform necessary operation such as
setting of encryption.
If you want to specify access point manually, click Manual Setup on the Access
Points dialog box. Enter the settings for the target access point on the Manual
Setup dialog box, then click Connect. The target access point is searched with
the specified settings.
For information on how to change settings on the access point, refer to your
access point's instruction manuals or contact its manufacturer.
Important
If you connect to a network that is not protected with security measures, there is
a risk of disclosing data such as your personal information to a third party.
SSID
Enter the SSID set to the access point. The SSID is case sensitive. When using
AirPort, enter the network name (SSID) in alphanumeric characters.
SSID is also called ESS-ID. For details, refer to your access point's instruction
manuals or contact its manufacturer.
Encryption Method
Do not use
Select to disable encryption.
Use WEP
Select when transmission is encrypted using the WEP key you specified.
Use WPA
Select when transmission is encrypted using the passphrase (WPA key) you
specified.
The actual encryption key is renewed automatically at a certain time interval,
making the transmission harder to break.
Use WPA2
Select when transmission is encrypted using the passphrase (WPA2 key)
you specified.
The actual encryption key is renewed automatically at a certain time interval,
making the transmission harder to break.
Note
If a WEP key/Passphrase (WPA or WPA2 key) has not been set, a detailed
settings dialog box is displayed. To change the settings, click Configuration on
the Manual Setup dialog box. For details, see "About Network Key (Windows)/
Network Password (Macintosh)" on page 64.
Troubleshooting 67