Switching On/Off; Care Instructions - Eschenbach visolux+ Manual De Instrucciones

Switching on/off

Press the on / off switch (q) to turn the device on or off. To save battery power, the unit automati-
cally switches off after about 30 minutes. If you wish to continue using it, turn it on again.
Operation
+
Put visolux on a flat surface for a magnified
display of the reading material. Due to its large
field of view, visolux
pictures and postage stamps. If you think the colour
temperature of the LED light is too cold, you can
slide the built-in orange filter in front of the LEDs in
order to achieve a warmer colour temperature.

Care Instructions

X When cleaning visolux
holic or organic solvents and no abrasive detergents! The lenses could be destroyed!
X Do not clean visolux
X Clean visolux + only with a soft dry cloth. For heavier soiling (e.g. fingerprints), moisten the
cloth slightly.
+
is also suitable for viewing
+ do not use any soap solutions that contain softening agents, no alco-
+ in an ultrasonic bath or under flowing water!
- 10 -