Ygnis VARJET Serie Manual Tecnico página 89

6.4.2
This configuration places the condenser directly in series with the heater without separating the "low" and
"high" temperatures of the installation. To allow the condenser to be bled correctly it is necessary to fit a
bleed system on the flange fitted with a sleeve and mount the assembly on the "high temperature return"
tapping.
3/8" sleeve for purge
system
6.4.3
This hydraulic configuration allows the separation of the "high" temperature returns from the "low"
temperature returns to obtain the maximum benefit from the condensation.
1NO0P0007-D
Varjet 1 - 14
Two tapping configuration installation
Heating return
Three tapping installation
High
High
temperature
temperature
return
return
Low temperature
return
Heating outlet
1NO1P0001_F13
Heating outlet
Retour basse
1NO1P0001_F13
température
89