Electrical Connection; Check Rotation Direction; Operating Instructions - Beissbarth MS 75 Manual Original

4.� Electricalconnection
1. Check the correspondence of the mains tension and
the tension shown on the identification tag.
2. Ask a qualified electrician to mount a connection
plug for single-phase or (depending on the tension
you have ordered ) three-phase current (see the
electrical connections diagram inside the electrical
panel).
i
The costs of arranging a mains protection device for
the plug are borne by the customer.
3. Protect the MS 75 according to specific national
rules.
4.4 Checkrotationdirection
Warning-malfunctioningdanger!
MS 75 turns in counter-clockwise direction.
¶
Turn off the main switch.Check the manual
section dedicated to functioning anomalies
to find the cause (see chap. 5.3)
For a correct functioning of MS 75 it is extremely im-
portant that after having connected and started the ma-
chine the rotation direction corresponds to that shown
by the arrow on the control unit motor.
Fig. 2:

Check rotation direction.

Beissbarth GmbH
All manuals and user guides at all-guides.com
5.
!
Operatinginstructions|����|2�

Operating instructions

Warning-tireorrimdamagedanger!
Excessive pressure can e. g. result in cracks
(on the inside/outside) of the tire. The rim
can be scratched or deformed.
¶
Read the Wdk publications available in
German and English! (www.wdk.de: moun-
ting/demounting instructions – criteria
catalogue)
¶
Inner temperature of the tire must be at
least 15 °C (only in case of RFT/UHP).
¶
Read the Wdk publications available
in German and English! (www.wdk.de:
mounting/demounting instructions – tire
overheating)
¶
Adjust pressure to the type of tire.
¶
Use the plastic protections on the types of
rim that need it.
Before demounting or mounting operations it is ext-
remely important to collect all the rim and tire data.
In this way it will be possible to know in advance the
mounting, the pressure and the required accesso-
ries!
����|2� |2� en
|
1 695 301 979 2011-07-16